Shailesh Rao A, “Studies on Plasma Sprayed Thermal Barrier Coating with Increase in Coating Thickness”, Tribology in Industry, Vol. 40, No. 3 (2018) 420-432, DOI: 10.24874/ti.2018.40.03.08

P N Jyothi, “Physical properties of Nano-based Bio-Oils as cutting fluids”, Journal of Advanced Research In Manufacturing, Material Science & Metallurgical Engineering, VOL 5, NO 3 ,2018,pp 6-11,

 Sridhara S N, et al,”Experimental investigation on thermal performance of helical grooved flat heat pipe”, International Information and Engineering Technology Association, Modelling, Measurement and Control B, Vol. 87, No. 1, March 2018, pp. 55-62

S. N. Sridhara,et.al, “THERMAL NETWORK MODEL FOR DEVICE IN FLAT HEAT PIPE ASSISTED HEAT SINK”, Heat Pipe Science and Technology, An International Journal 5(1-4) 213-220, 2014

Hareesh. A,et.al,  “Synthesis and Characterization of Biodegradable Polymer Nano composite”, International Journal of Advanced Research in Engineering & Management (IJAREM), Vol. 03 , Issue 04, 2017 ISSN: 2456-2033 PP. 01-06

Shailesh Rao A, Yuvaraja Naik, “Effect of the Metal Transport on the Mechanical Properties of Al-2Si alloys processed through Friction Stir Welding Processes”, Metallurgical and Materials Transactions B, Accepted for Publication (IF:1.48)

Shailesh Rao A, Mahantesh Tattimani, “Effect of rotational speed in vertical centrifugal casting on the wear properties of obtained aluminum tubes” ISTM Transaction of Mechanical Engineering, Springer Verlag Publication, Accepted for Publication (IF:1.08)

Shailesh Rao A, Yuvaraja Naik, “Understanding the Effect of Multiple Traverse Feed during Friction Stir Welding Processes”, Archives of Metallurgy and Materials, Accepted for publication (IF: 0.96)

Shailesh Rao A, Yuvaraja Naik, “Comparison  on Appearance, Microstructure and Tensile properties during Friction Stir Welding Processes of Al-Si alloys”, The physics of metals and metallography, Springer verlag Publication, Accepted for publication (IF: 0.761)

Jyothi P N, M.C.Jagath,  K.Channakeshavalu, “Influence of Centrifugal Force on the Microstructure and Hardness of ZA-8 Alloys”, SSRG International Journal of Material Science and Engineering (SSRG-IJMSE) volume 1 Issue3 Nov to Dec 2015

Jyothi P N, Jagath M.C, Channakeshavalu K, “Wear Characteristics of ZA-27/Al2O3 Composites Processed by Centrifugal Casting”, International Journal of Materials Science and Engineering, Volume 3, Number 4, December 2015

Jyothi P N, M.C.Jagath,  K.Channakeshavalu, “Influence of Centrifugal Force on the  Microstructure and Hardness of ZA-8 Alloys”, SSRG International Journal of Material  Science and Engineering (SSRG-IJMSE) volume 1 Issue3 Nov to Dec 2015.

Jyothi P N, M.C.Jagath , K.Channakeshavalu, “ Optimization and Prediction of Mechanical Properties of ZA-27/Al2O3 MMC Processed By Centrifugal Casting Using Multiple Regression Analysis”, International  Journal of Engineering Journal of Engineering Studies and Technical Approach,ISSN.2395-0900, Volume 01, No. 10, October 2015.

Jyothi P N, “Comparison of Mechanical Properties of Al-5% Si Alloy Reinforced with Cow dung ash and Rice husk ash”, International Journal of Latest Research in Engineering and Technology, Volume 1, Issue 4,September 2015 ,PP 55-58.

Hareesh, et.al. “Case Study on Offgrid solar Power”, Advanced Engineering Technolgoy and Application, An International Journal, Appl.3, No. 2, 1-9, May 2015.

Dr.Shailesh Rao A, et.al. “Investigation of  Particle Segregation and Solidification Time in FGM’s Using Centrifuge Casting Techniques”, Applied Mechanics and Materials, accepted for publication

Dr.Shailesh Rao A, P N Jyothi, “Processing of ZA-27 Based MMC Reinforced With Al2O3 By Centrifugal Casting”, International Journal of Advancements in Mechanical and Aeronautical Engineering– IJAMAE, Volume 2: Issue 1 [ISSN: 2372-4153], Publication Date: 30 April, 2015

Dr.Shailesh Rao A, “Effect of melt flow with various rotational speeds in vertical centrifugal casting process on appearance, microstructure and hardness behavior of Al-2Si alloy”, Journal of Materials and Manufacturing Processes, Taylor and Francis, DOI.10.1080/10426914.2015.1019093 (IF: 1.48)

Dr.Shailesh Rao A, et.al., “Effect of melt flow with various rotational speeds in vertical centrifugal casting process on appearance, microstructure and hardness behaviour in Al-2Si alloy”, METTRANS B, DOI 10.1007/s11663-014-0257-y (IF: 1.323)

Akashdeep B N, et.al. “OPTIMIZATION OF TIME AND ROTATIONAL SPEED OF DISC FOR TINNED MILK USING NUMERICAL SIMULATIONS FOR UNIFORM HEAT DISTRIBUTION”, International Journal of Advanced Technology in Engineering and Science ,Volume No.02, Issue No. 08, August 2014 ISSN (online): 2348 – 7550.

P. N. Jyothi, Rao A. Shailesh, et.al, “Influence of Refiner in ZA-12 Alloys During Centrifugal Casting Process” JOM, Vol. 66, No. 5, 2014,pp 720-725.

Jyothi P N and Dr. Shailesh Rao A, et.al,“Understanding the Melt Flow Behaviour of ZA alloys Processed through Centrifugal Casting” International Journal of Mechanical Engineering and Technology (IJMET), ISSN 0976 – 6340(Print),ISSN 0976 – 6359(Online) Volume 4, Issue 1, January – February (2013)

S.N. Sridhara,et.al   “Influence of Heat Input, Working Fluid and Evacuation Level on the Performance of Pulsating Heat Pipe”,Volume 5, Number 2, Issue 10, Journal of Applied Fluid Mechanics, July 2012

S. N. Sridhara et.al  “Buoyancy Driven Heat Transfer in Cavities Subjected to Thermal Boundary Conditions at Bottom Wall”, Volume 5, Number 2, Issue 10 of the JAFM, July 2012.

S. N. Sridhara,et.al  “Effect of Different Thermal Boundary Conditions at Bottom Wall on Natural Convection in Cavities”,Journal of Engineering Science and Technology (JESTEC), Vol 6, issue 1, pp 109-130, Feb 2011.

Dr. ShaileshRao “Inference of Optimal Speed for Sound Centrifugal Casting of A1-12 Si Alloys”Journal of Materials, Springer Verlag Publications, Vol 63, No.5.25-29, 2011.

K. Ramanarasimha, S.N. Sridhara, M.S. Rajagopal, K.N. Seetharamu, “Parametric Studies on Pulsating Heat Pipe”, International Journal of Numerical Methods for Heat and Fluid Flow”, Vol. 20, No.4, pp 392-415, 2010. (Awarded with Most Significant Paper Award for the year 2010 from Emerald sciences.)

T.R. Sridevi and S.N. Sridhara, “Libraries of Engineering Institutions in Bangalore: A Case Study and Future Plan for 2020”, Vol. 4, No. 1, pp 1-6, Jan-June 2010.

Mr. Shivanand, “Effect of stain rate on fracture toughness of HEMP fiber composites”, International conference on engineering, science, management and advances in research technology (ICESMART-15)”, T.John Institute of technology, Bengaluru, 29th and 30th April 2015.

S. N. Sridhara, et.al, “THERMAL NETWORK MODEL FOR DEVICE IN FLAT HEAT PIPE ASSISTED HEAT SINK”, 17th International Heat Pipe Conference, IHPC-17, October 13th -17th 2013, Kanpur, UP , India.

A.Hareesh A.Hareesh, KV Mahendra, Krupakar V, “Mechanical Testing On The Behavior Of Metal Matrix Composite Of Al6061 And Tungsten Carbide”. ICSE organized in DayanandaSagar college of engineering on 21-23 Apr. 2010

AkashdeepB.N.Krishnamurthy K.N., Shashishekar K.S. and Akashdeep B.N., “Performance Analysis of Vacuum Tube Collectors for Hard Water Using Jacket Type Heat Exchanger”. International Journal of Engineering Research and Technology, Volume 3, Number 3 (2010), pp. 641—651, © International Research Publication House http://www.irphouse.com

Krishnamurthy K.N.,Shashishekar K.S. and Akashdeep B.N., Performance Analysis of Vacuum Tube Collectors for Hard Water Using Jacket Type Heat Exchanger. International Journal of Engineering Research and Technology, Volume 3, Number 3 (2010), pp. 641—651, © International Research Publication House

Dr. Shailesh Rao, Jyothi P N, et.al.,  “Processing of ZA-27 Based MMC Reinforced with Al2O3 by Centrifugal Casting”, October 25-26, 2014, IntConf on AMRE 2014, Zurich, Switzerland

P.N. Jyothi,. A Shailesh Rao, et.al, “Influence of Refiner Aluminium Titanium Boride on the ZA alloys Processed through Centrifugal Casting” ASME 2013 International Mechanical Engineering Congress and Exposition,IMECE2013,November 15-21, 2013, San Diego, California, USA.

Charitha.M.Rao, Dr. C.P.S. Prakash,a“Studies on the effect of cutting conditions on surface finish in diamond turning process ” Presented in International Conference Organized by DSCE, Bangalore, October (2013).

Mr.YuvarajNaik presented paper at International Conference on “Advancement & Futuristic Trends In Mechanical and Material Engineering“ organized by Punjab Technical University Titled ”Characterization of Aluminium Alloy-5083 weldment using GTAW and GMAW” On 3rd to 6th october 2013.

Krishnamurthy, AkashdeepB.NandShashishekar K S, “Performance Analysis of a Flat Plate collector and a Vacuum Tube Solar Collector for Hard Water using a Jacket Type Heat Exchanger”, International Conference on Advanced Materials, Manufacturing, Management and Thermal Sciences (AMMMT 2013) ,Siddaganga Institute of Technology, Tumkur, Karnataka, India on May 3rd and 4th ,, 2013.

Mr. YuvarajNaik International Conference on “Advancement & Futuristic Trends In Mechanical and Material Engineering“ organized by Punjab Technical University Titled ”Investigation of the structure and Mechanical properties of Friction stir welded Aluminium Alloy” On 5th to 7th october 2012

Krishnamurthy K.N Shashishekar K.S., Performance Analysis of a Flat Plate collector and a Vacuum Tube Solar Collector for Hard Water using a Jacket Type Heat Exchanger. International Conference on Renewable Energy (ICRE 2011). Organized by Centre for Non-Conventional Energy Resources University of Rajasthan, Jaipur, India on January 17 – 21, 2011.

AkashdeepB.N.Krishnamurthy K.N., Shashishekar K.S. and Akashdeep B.N., Performance Analysis of Vacuum Tube Collectors for Hard Water Using Jacket Type Heat Exchanger. International Conference on Advanced Materials, Manufacturing, Management and Thermal Sciences (AMMMT 2010) held at Siddaganga Institute of Technology, Tumkur, Karnataka, India on November 18th and 19th 2010.

P.N. Jyothi ,et al, “Influence of non-edible vegetable based oil as cutting fluid on chip, surface roughness and cutting force during drilling operation of Mild Steel”, Advances in Materials and Manufacturing Applications (IConAMMA 2016)” 14th – 16th July, 2016, Amrita Vishwa Vidyapeetham University, Bangalore.

P.N. Jyothi,et al, “Performance evaluation of NEEM oil and HONGE Oil as cutting fluid in drilling operation of mild steel”, International Conference on Innovative and Smart Materials- ICISM 2016, Dec 26-28,2016, Singapore.

By Students:

Balaji R, Deepak.M, K.V.Dilip Kumar, Manoj.V.Reddy, Hareesh. A, “Synthesis and Characterization of Biodegradable Polymer Nano composite”, International Journal of Advanced Research in Engineering & Management (IJAREM), Vol. 03 , Issue 04, 2017 ISSN: 2456-2033 PP. 01-06

Jyothi P.N,Susmitha M, Sharan.P “Performance evaluation of NEEM oil and HONGE Oil as cutting fluid in drilling operation of mild steel”, International Conference on Innovative and Smart Materials- ICISM 2016, Dec 26-28,2016, Singapore

M Susmitha, Sharan.P, P.N. Jyothi, “Influence of non-edible vegetable based oil as cutting fluid on chip, surface roughness and cutting force during drilling operation of Mild Steel”, Advances in Materials and Manufacturing Applications (IConAMMA 2016)” 14th – 16th July, 2016, Amrita Vishwa Vidyapeetham University, Bangalore.

Bharath G, Bharatheshwar Reddy, Bharath Kumar, Naresh, Saumiya Abraham, “Design and fabrication of closed loop water tunnel for experimental and numerical investigation of flow dynamics over bluff bodies”, National Conference on Advances in Mechanical Engineering-2016, K.S. School of Engineering and Management, Bangalore, 29th April 2016.

Mr. Akashdeep B N, HariPrasad.D, Deekshith Kumar.B.S, Harish.R and Vinay Varshan.T, “Optimization of Reinforcement Speed for Aluminum Metal Matrix Composite for Marine Application”, National Conference on Advances in Mechanical Engineering-2016, K.S. School of Engineering and Management, Bangalore, 29th April 2016.

Nikhil .R , Shashishekar .T.C, Vinyas .P.V, and Muttaraj .N, “Design and Development of an Aquatic Weed Cutter Model”, National Conference on Advances in Mechanical Engineering-2016, K.S. School of Engineering and Management, Bangalore, 29th April 2016.

Manohar K, Shivanand, “An Experimental Investigation on Mechanical Properties of Hybrid Hemp/Glass Fiber Composites”, National Conference on Advances in Mechanical Engineering-2016, K.S. School of Engineering and Management, Bangalore, 29th April 2016.

Susmitha.M, Sharan .P, Jyothi.P.N, “Application of Vegetable based oils as cutting fluids for various machining operations -A review”, National Conference on Advances in Mechanical Engineering-2016, K.S. School of Engineering and Management, Bangalore, 29th April 2015.

Akashdeep B N, Chethan J,  Darshan Naik , Lakshmi Kesari , Mahanthesh S, “ Automated Manual Gear Transmission in Motor Bikes”, National Conference on Advances in Mechanical Engineering-2016, K.S. School of Engineering and Management, Bangalore, 29th April 2016.

Santosh Kumar K J, Naveen Kumar T, Vamshi Krishna P M , Yenuganti Sreekar , “Friction Stir Welding of Hypoeutectic Alloys (Al-5wt%Si) by using Milling Machine”, National Conference on Advances in Mechanical Engineering-2016, K.S. School of Engineering and Management, Bangalore, 29th April 2016.

Punith V, G Bindu Madhavi, Shivanand, “A Review on Recent Developments of Laser Welding Technology in Industries”, National Conference on Advances in Mechanical Engineering-2016, K.S. School of Engineering and Management, Bangalore, 29th April 2016.

Abhinab Baruah, Ganesh Singh, Rakesh Mohan, Jyothi .P.N, “Research work on Fiber Reinforced Hybrid Composite- A review”, National Conference on Advances in Mechanical Engineering-2016, K.S. School of Engineering and Management, Bangalore, 29th April 2016.

Santosh Kumar K J, Akshay G,  Thyagaraj Naik V  , Pradeep H K, “Design and Testing of Pot Erosion Testing Machine”, National Conference on Advances in Mechanical Engineering-2016, K.S. School of Engineering and Management, Bangalore, 29th April 2016.

Chandan.M , Gurudutt.R, Praveen.M, and Sanjay Kumar.S, “Design and Fabrication of Pneumatic Powered Automatic Feed Sheet Metal Cutting Machine”, National Conference on Advances in Mechanical Engineering-2016, K.S. School of Engineering and Management, Bangalore, 29th April 2016.

Arjun B N, Bharath R N, Kumar N V, Mithun Kumar C, Bharathkumar M, J Prashanth, “Design and Fabrication of Multi-Purpose Swimming Robot”, National Conference on Advances in Mechanical Engineering-2016, K.S. School of Engineering and Management, Bangalore, 29th April 2016.

Yuvaraja Naik , Bharathkumar M Nara Sai Kiran Chowdary , Manubolu Sai Kiran, Mohan Kumar N , Durgaprasad G, “Design and Fabrication of Mechanical Fixture for Friction Stir Welding Process”, National Conference on Advances in Mechanical Engineering-2016, K.S. School of Engineering and Management, Bangalore, 29th April 2016.

By Faculty:

“Effect of Honge Oil on Cutting Parameters during Turning Operation for Mild Steel”, Jagath J K,Anjan R, Alam Radhika, Dr. Shailesh Rao A, NCAME 2015, KSSEM, Bangalore, 28th April 2015

S N Sridhara, et.al. “Peak Temperature Prediction for Device in Flat Heat Pipe Using 1D -Network Model”, 2nd National Conference on Advances in Mechanical Engineering-2015, K.S.School of Engineering and Management, Bangalore,28th April 2015.

Harsha J, et.al. “Fabrication and Evaluation of Solid Oxide Fuel Cell stack components”, 2nd National Conference on Advances in Mechanical Engineering-2015,K.S.School of Engineering and Management, Bangalore,28th April 2015.

S. Chandrashekar,“Development of Precision Blanking and Piercing Punches”, 2nd National Conference on Advances in Mechanical Engineering-2015,K.S.School of Engineering and Management, Bangalore,28th April 2015.

K NarayanaSwamy, Jyothi P.N, Dr. Shailesh A Rao, “Effect of centrifugal force on the Microstructure of ZA 8 alloy” presented paper at National Conference “Advances in Mechanical Engineering AME-2013” held on Nov 11th and 12th at KSSEM, Bangalore.

Shashwath Pakkala,“Development and implementation of database management system for garment industry”, 4th National Conference on “Emerging Trends On Engineering Technologies ” ,Jyothy Institute of Technology, Bangalore, 21 Feb 2015

Shashwath Pakkala,“Development and implementation of database management system for garment industry”, 4th National Conference on “Emerging Trends On Engineering Technologies ” ,Jyothy Institute of Technology, Bangalore, 21 Feb 2015.

Charitha.M.Rao, Sachin B,“A Study on recent trend : Additive manufacturing ” Presented in National Conference AME 2013 at KSSEM, Bangalore, November (2013).

J.Prashanth, Dr. A.J.Antony,“A Review on the ethanol and its acceptability as a blend for gasoline in India” Presented in National Conference AME 2013 at KSSEM, Bangalore, November (2013).

J.Prashanth, Dr. G.B. Rudrakshi,“Challenges and bottle necks in the implementation of ERP in small scale industries” Presented in Pratibimb, National Conference at NIE, Mysore, October (2013).

Charitha.M.Rao, Dr. C.P.S. Prakash ,“Optimization of cutting conditions of surface finish in diamond turning process ” Presented in Pratibimb, National Conference at NIE, Mysore, October (2013).

Charitha.M.Rao, SachinB,“Surface Engineering-Laser Cladding”, Presented in NWS 2013, held at KTPO, Bangalore, February (2013).

Charitha.M.Rao,Mr. Ugrasen G,“A Study on Micro Electrical Discharge Machining”, Presented in ETET 2012, Organized by Jyothy Institute of Technology, Bangalore, March (2012).

Mr. Hareesh.A“Facing Improvement by ARC and TIG Welding”DOCAM’12, East West Institute of Technology,May 18-19, 2012.

Mr. Hareesh.A“Facing Improvement by GAS and TIG Welding”DOCAM’12, East West Institute of Technology,May 18-19, 2012.

ManjunathShettar, “Kaizen – A Powerful Tool of Lean Manufacturing” In SMIT – RAET 2012, National Conference,”National Conference on Recent Advances in Engineering and Technologies”, Sri Muthukumaran Institute of Technology, Chennai, April 27th , 2012.

Mr. YuvarajNaik,“Comparison of Mechanical and Micro Structural Behaviors of Tungsten Inert Gas welded and Metal Inert Gas Welded Aluminum Alloy AA 5083”,National Conference in Emerging Trends in Mechanical Engineering”, RREC, Bangalore.March 2012.

Mr. R. Manjunatha,“Optimization of Tangential, Feed force and Surface roughness during machining steel EN-19, using Coated Carbide Insert by Taguchi Technique”. Thrust Areas of Engineering. Global Academy of Technology, Bangalore, 20-21 January 2012.

A.Hareesh G.R.C. Pradeep, A. Ramesh, B. Durgaprasad, “Study of Hard surfacing ofAISO1020 Steel using Gas& TIG Welding processes” presented in DOCAM12 organized in East West Institute of Engg, Bangalore, India during 18, 19 May. 2012

PAPERS PRESENTED BY STUDENTS

K R Kishan, Lakshmi Kesari , “Finite Element Analysis on Friction Stir Welded Al-Si Alloys”, 4th national conference on “Emerging Trends On Engineering  Technologies” ,Jyothy Institute of Technology, Bangalore, 21 Feb 2015

K R Kishan, Lakshmi Kesari, “A Review on Shape Memory Alloys”, 2nd National Conference on Advances in Mechanical Engineering-2015,K.S.School of Engineering and Management, Bangalore,28th April 2015

Susmitha.M, Sharan P ,“Recent Advances in 3D Printing Technology”, 2nd National Conference on Advances in Mechanical Engineering-2015,K.S.School of Engineering and Management, Bangalore,28th April 2015

Avilash Jha, Gnana Murthy D.B, Sriranga T A, Vaibhav M.S,“A Review on Making of Cylinder Liner”, 2nd National Conference on Advances in Mechanical Engineering-2015, K.S.School of Engineering and Management, Bangalore, 28th April 2015.

Mohan Kumar Aradhya H M, Monish H R , “Comfortable Coconut Tree Climber” ,2nd National Conference on Advances in Mechanical Engineering-2015,K.S.School of Engineering and Management, Bangalore,28th April 2015.

Jagath J K, Anjan R , “Effect of Honge Oil on Cutting Parameters during Turning Operation for Mild Steel”, 2nd National Conference on Advances in Mechanical Engineering-2015,K.S.School of Engineering and Management, Bangalore,28th April 2015.

Akiff Delvi, Bharath D, Mohammed Hammood Hussain, Gourav K,“Dual Mode System to Increase Fuel Efficiency in Two Wheelers”, 2nd National Conference on Advances in Mechanical Engineering-2015,K.S.School of Engineering and Management, Bangalore,28th April 2015.

G.S.Sandesh, et.al “Topology optimization of active strut incorporated with piezoelectric stack actuators”, National conference on topical transcend in mechanical technology (TTMT-15), SJB Institute of Technology, Bengaluru, 9th May 2015.

Pavan Kumar A ,BharathHemanth “Shear Thinking Fluids for Armours” Presented paper at National Conference “Advances in Mechanical Engineering AME-2013” held on Nov 11th and 12th at KSSEM, Bangalore.

Abhishek .K, Vinayaka K.C, Suhas B.S “Study on self-sustaining House using Renewable Sources of Energy” Presented paper at National Conference “Advances in Mechanical Engineering AME-2013” held on Nov 11th and 12th at KSSEM, Bangalore.

RithvikBharadwaj. R, Kavya S Kumar “Alternative Fuels for Diesel Engine “Presented paper at National Conference “Advances in Mechanical Engineering AME-2013” held on Nov 11th and 12th at KSSEM, Bangalore.

Bhargav V , Kartik S Murthy “GPS based Automated Beam Control” Presented paper at National Conference “Advances in Mechanical Engineering AME-2013” held on Nov 11th and 12th at KSSEM, Bangalore.

Pavan Kumar A ,BharathHemanth “ Recent Advances in Composite Materials for Aviation Industry” Presented paper at National Conference “Advances in Mechanical Engineering AME-2013” held on Nov 11th and 12th at KSSEM, Bangalore.

Ajith D, Shailesh Rao A,“Study of Spheroidal Graphite 400/3 processed through Centrifugal and Gravity method used in Cylinder Liner”, National Conference in Emerging Trends in Engineering Technology, Jyothi Institute of Tech., Bangalore, 15-16th March 2013

Chetan Pratik, Kavya M, RithvikBharadwa,j “Case Study in Understanding an Improvement in Carburizing Process in Metal Industry”, National Conference in Emerging Trends in Engineering Technology, Jyothi Institute of Tech., Bangalore, 15-16th March 2013

Technical Talk delivered

Delivered a talk on “Possible research Avenues in Mechanical Engineering with Case Studies” at a Faculty Development Program on the topic “ Advances Research in Mechanical Engineering”  at BNM Institute of Technology, Bangalore on 19th January 2016

Delivered a talk on “Understanding severe plastic deformation of materials during Friction Stir Welding Processes” at a workshop on title “SPD Techniques with Emphasis on Repetitive Corrugation and Straightening” (sponsored by Naval Research Board) at Basaveswarya College of Engineering, Bagalkot on 3rd September 2016

Other Accomplishment

Mahantesh Tattimani, Research Scholar has completed PhD on the topic “Investigation to Melt Flow Behaviour In Vertical Centrifugal Casting Process” under the guidance of Dr Shailesh Rao A

Shailesh Rao A, Mahantesh Tattimani, “Effect of rotational speed in vertical centrifugal casting on the wear properties of obtained aluminum tubes” ISTM Transaction of Mechanical Engineering, Springer Verlag Publication, Accepted for Publication (IF:1.08)

Shailesh Rao A, Yuvaraja Naik, “Understanding the Effect of Multiple Traverse Feed during Friction Stir Welding Processes”, Archives of Metallurgy and Materials, Vol 63,1,203-210,2018 (IF: 0.56)

Share This