FDP on ADVANCED VLSI DESIGN USING CADENCE TOOLS

The Electronics and Communication Engineering department organized a Five day Faculty Development Programme on “ADVANCED VLSI DESIGN USING CADENCE TOOLS” from

11th – 15th of July 2016. The FDP was inaugurated by Management, Principal, Dr. S N Sridhara Sir, HOD, Dr. Girish V Attimarad, Resource Persons Mr. Naveen and Ms. Padmashree from Cadence India, M/S Entuple Technologies Pvt Ltd., Bangalore along with participants from various colleges.

The program offered an intensive hands-on experience on various aspects of VLSI design, such as schematic drawing, simulation, verification of design and creation of layout by using CADENCE. For a given design, Cadence allows for various tools from other vendors also to be integrated. The program focused to familiarize faculty to conduct VLSI lab experiments of VII Semester Electronics & Communication Engineering of VTU curriculum by using Cadence Tool. The program helped the faculties to develop Projects right from Design Simulation to Synthesis to Layout and finally Verification. Researchers can use CADENCE tool for all the levels of chip design. Industrial visit was also organized and case studies were discussed. It was an extremely successful event of the department.

In House Faculty Development Programme

ECE Department is a full-fledged department with well-equipped laboratories like VLSI, Power Electronics, Digital Signal Processing, Analog Communication + LIC, Analog Electronic Circuits and Logic Design in Odd Semesters. To make familiarize each faculty about all these labs, ECE department under the guidance of respected Principal, Dr. S.N Sridhara sir and HOD, Dr. Fathima Jabeen conducted an in house Faculty development programme which was held from 8th to 17th of July 2015. Faculties were provided hands-on sessions along with useful presentations given by each lab Incharge faculties.
FDP

VTU- VGST Sponsored Faculty Development Programme (FDP)(19th May 2014)

FACULTY DEVELOPMENT PROGRAMME ON MATLAB, SIMULINK AND EX-CEL
Faculty development programme was conducted by the college from 15th of July 2014 to 18th of July 2014 on the topic MATLAB, SIMULINK and Excel for the faculties of all the departments. The event was inaugurated by Dr. S N Sridhara, Principal and Dr. Ashwath Kumar, Dean, Research & PG studies. The Resourse Persons were Dr. Karthik P & Mr. Ravikiran B A for MATLAB & SIMULINK; Mr. Sanjay Naik for Excel.

kerala trip

Report on IoT and Data Analytics Workshop

The Department of Electronics and Communication organized a 3 day workshop on Internet of things and Data analytics from 27/09/2016 to 29/09/2016 in Aryabhata Seminar Hall in KSSEM campus by IISC team headed by Prof. Jamadagni and his team for 7th Sem Students. The Students were able to learn and do coding using Bandicoot, Python, Panda etc. And also students were asked to do various projects under different platforms like Flight Monitoring, Power Monitoring, Smartphone and twitter scarping applications etc.

Three Day Workshop on “Virtual Instrumentation Using Labview” from 8th to 10th August 2016.

The Department of Electronics and Communication Engineering organized a Three Day Workshop on “Virtual Instrumentation Using LabVIEW” from 8th to 10th August 2016 in HDL lab from 9.00 Am to 3.45 Pm for 7th semester students. The workshop was formally inaugurated by Dr. Girish Attimarad, Head of the department, Mr. Sanjay Nayak, Associate Professor, Resource persons and Program Coordinator, Dr. Karthik P, Professor, ECE Dept. The main objective of the workshop was to make the undergraduate students understand the importance of Virtual Instrumentation using LabVIEW. Also workshop stated with basic operations like addition, multiply etc., using LabVIEW software tool. Students were also provided with hands-on sessions working on real-time applications like talking tom, checking 3D graphs, creating a virus. MyDAQ and MyRio Hardware using LabVIEW software tools were highlighted. This workshop provided knowledge about data acquiring techniques needed to carry out final year project for final year students.

Two Days Workshop on Image Processing and Natural Interfaces Using MATLAB and SIMULINK – 8th and 9th October 2015

The Department of Electronics and Communication Engineering organized Two Day Workshop on “Image Processing and Natural Interfaces Using MATLAB and SIMULINK” on 8th and 9th of October 2015 in Aryabhata Seminar hall from 9AM to 3.45 PM The main objective of this workshop is to make the students of BE/ M.Tech /Research Scholars understand the importance of Natural user interfaces (NUI’s) and their importance in day to day life with advances in technology. Also workshop gives hands on experience to the participants on NUI’s by making the student design and develop his/her own NUI using MATLAB/ SIMULINK. Around 100 participants from various college were participated and made it a successful event. Students found it very useful as they can design and implement a system with image processing.

The resource persons were Mr. Sudhir Rao, Ms. Ranjani B.S. Mr. Sumukha B. M, Ms. Varsha G Bhat, Mr. Shreyas S and Ms. Eshwari Srinivas from World serve Education.

 

DA

1) ROBOTRYST WORKSHOP – 12th, 13th & 14th Feb 2015.

A three day workshop ‘RoboTryst-2014’ was arranged on 12th, 13th & 14th Feb 2015. RoboTryst is a National Robotics Championship and Workshop series jointly organised by TRYST-2015 IIT-Delhi and Robosapiens Technologies Pvt. Ltd. The event was inaugurated by Principal Dr. S.N.Sridhara. The participants were trained on basics of robot electronics. The resource persons were Mr. Vihari and Mr. Subham.
labview1

2) Workshop on LAB VIEW  23rd to 24th Feb 2015

Department of Electronics and Communication Engineering organized a two day Workshop on Lab VIEW, in association with Trident Tech Pvt Ltd, New Delhi exclusively for M.Tech students. The Workshop was formally inaugurated by Dr. S.N Sridhara, Principal & Mr. Jiyo Mathew – Resource person.

labview1

3) Workshop on LAB VIEW – 12/12/2014

Department of Electronics and Communication Engineering organized a one day Workshop on LAB VIEW, in association with Trident Tech Pvt Ltd, New Delhi. The Workshop was formally inaugurated by Dr. Fathima Jabeen, Prof & HOD, ECE Dept, Dr. Aswatha Kumar M, Dean, PG & Research & Mr. Jiyo Mathew – Resource person. Faculties from ECE, EEE also joined the programme.

labview1

4) ROBOTRYST WORKSHOP

A two day workshop ‘RoboTryst-2014’ was arranged on 12th and 13th Feb 2014. RoboTryst is a National Robotics Championship and Workshop series jointly organised by TRYST-2014 IIT-Delhi and Robosapiens Technologies Pvt. Ltd. The event was inaugurated by Principal Dr. S.N.Sridhara. The participants were trained on basics of robot electronics. The students group of Abhishek, Vinayaka, Pratham and Vindhya won the competition in “Escape tunnel” category at the final level held at IIT Delhi.

5) Workshop on LabVIEW – 04/09/2014 – 05/09/2014

Department of Electronics and Communication engineering organized a 2day Workshop on LabVIEW, EVLSI II+, DAQ & URSP in association with Crane Software International Ltd & National Instruments. The Workshop was informally inaugurated by Dr. Fathima Jabeen , Prof & HOD, ECE Dept. , Dr. Aswatha Kumar M, Dean, PG & Research & Mr. Sivakumar, Resource person from STAR com. Faculties from ECE, EEE & few faculties from other colleges also joined the programme.

labview1
6) WORKSHOP ON ARM CORTEX

A two day Workshop was conducted by the college from 23rd of July 2014 to 24th of July 2014 on the topic ARM CORTEX for the faculties of ECE department. The event was inaugurated by Dr. S N Sridhara, Principal and Dr. Ashwath Kumar, Dean, Research & PG studies. The Resourse Persons were Mr. Puneeth, Ms. Shwetha N A, Mrs. Swathi Gupta, Ms. Devika N and Mr. Vinay R . A few applications using ARM kits were demonstrated by M.Tech 3rd semester students.

ARM CORTEX

Seminar on Internship opportunities for 2nd year students

A seminar for 2nd year students was conducted on 21st August 2018 by Internshala student partners of KSSEM behalf of internshala, on topic “POWER OF INTERNSHIPS” by

Sushmitha R. Kirsur. 4th year CSE, Aravind K., 5th Sem ECE and Aditha S. 5th Sem ECE to create awareness about internships and professional courses. Internshala serves as bridge between studies and career. This internshala seminar was beneficial to many students who had no idea about internships.

Technical Seminar on “Data Analytics & Big Data “

Technical Seminar on “Data Analytics & Big Data ” was conducted by Department of Electronics and Communication on 7th October 2016 in the seminar hall for 5th Sem & 7th Sem ECE students. The resource person was Mr. Ashish Bothra & Sushmitha B from Jigsaw Academy-Bangalore. Seminar was carried out between 3 to 4 pm in Seminar hall, ECE Dept., KSSEM.

Technical Seminar on Microwave Engineering and RADAR

Technical Seminar on Microwave Engineering and RADAR was conducted by Department of Electronics and Communication on 5th September 2015 in the seminar hall for 5th semester ECE students. The resource person was Prof. V N Dabade, Ex Scientist (retired) and expert in RADAR technology from LRDE. Seminar was carried out for one and half an hour and was funded by EXCELTRON forum amount.

seminar

seminar

seminar

UG Project Exhibition (4th of May 2018):

The Annual Project Exhibition was organized by ECE Department on 4th May 2018 at Kaviratna Kalidasa Auditorium and Analog Electronic Circuits Laboratory. The Exhibition was inaugurated by Dr. Manju V. C., Professor, KSIT, Bangalore, who also acted as the External Judge for the projects exhibited. Mr. Nagaraj S., Assistant Professor, JIT, Bangalore, also served as the External Judge. Dr. Dushyanth N. D. and Mrs. Shanthala G. M. of the ECE Department, KSSEM acted as the Internal Judges in the judging panel.

A total of 32 projects were showcased during this event, 28 of which were final year UG Projects, 2 mini-projects done by 3rd year BE Students, and 2 mini-projects which were presented by the students of 2nd year BE.

The Project Exhibition was opened to all students and staff, as well as parents of students studying in the college. This event gave an opportunity to the students to showcase their technical and communication skills and served as a platform to encourage the other students to implement projects of their own.

UG Project Exhibition (24th of May 2017):

A Project Exhibition was organized in KSSEM on 21st May 2017 to showcase the technical talent of students by exhibiting their respective academic B.E. projects. The exhibited projects were inspected by Dr. S. N. Sridhara, Principal & Director and Dr. Girish V Attimarad, HOD and Professor, Dept. of ECE, K S School of Engineering and Management, Bangalore and judged by Dr. Ravi J, Professor, Department of ECE, Global Academy of Technology, Bangalore. Students were appreciated and honored for their work and demo was telecasted on DD-Chandana Channel on 24th of May 2017.

UG & PG Project Exhibition:

A Project Exhibition was organized in KSSEM on 22nd May 2016 to showcase the technical talent of students by exhibiting their respective academic projects both B.E and M.Tech. The exhibition was inaugurated by Shri Y. Ramachandra Naidu, President, Kammavari Sangham, Sri. K. Venkatesh Naidu, Secretary, Kammavari Sangham, Sri. D. Rukmangada, Treasurer, Kammavari Sangham, and Dr. S. N. Sridhara, Principal & Director, K S School of Engineering and Management, Bangalore. The exhibited projects were judged by Dr. Sudha K. L., Professor, Department of ECE, Dayananda Sagar College of Engineering, Bangalore, and Mrs. Vidhya R, Asst. Professor, Department of ECE, K S School of Engineering and Management, Bangalore.  Students were appreciated and honored for their work.

Project Exhibition

A Project Exhibition was organized in KSSEM on 14th May 2015 to showcase the technical talent of students by exhibiting their respective academic projects both B.E and M.Tech. Projects and were Judged by Mr. Veeresh Patil, Professor and Head of ECE Department, YDIT. Students were appreciated and honored for their work and demo was telecasted on DD-Chandana Channel on 23rd of May 2015.

Project Exhibition

On occasion of induction program for first year BE – 2014 on 3rd August 2014, the passed out students exhibited the projects to motivate the fresher’s.

Share This