Faculty Achievers

Department of Mechanical Engineering
Department of Mechanical Engineering

Faculty Achievers of Mechanical Engineering

2018

Faculty Achievers-100% Result

Sl No

Name

Subject

Semester

Photo

1

Dr. Jyothi.P.N

Non Traditional Machining (15ME554)

5

Dr. Jyothi P N

2

Mr. Bharath Kumar

Non Traditional Machining (15ME554)

5

Mr. Bharath Kumar

3

Mr. Vinod

Non-Conventional Energy Resources

(10ME754)

7

Mr. Vinod A

4

Mr. Bharath Kumar

Agile Manufacturing

(10ME765)

7

Mr. Bharath Kumar

KSCST PROJECTS APPLIED UNDER SPP

The Karnataka State Council for Science & Technology (KSCST) has invited project proposals from final year engineering students for the year 2018.The details of projects from the Department of Mechanical engineering  applied under SPP is given below;

Sl No Project Title Name Of The Guide
1 Design and Development of Mini Tiller for Small Farming Dr.S.N. Sridhara
2 Innovative Product in the field of Harvesting (Tap Root)in Agriculture Mr. Harsha J
3 Design, Fabrication and Analysis of Human Powered Car’ Mr. Santhosh Kumar KJ
4 Performance Evaluation of Nano based Bio-Oils as Cutting Fluid for Turning Operation of Mild Steel Dr. Jyothi.P.N
5 Design and Fabrication of Coconut Dehusking and Chopping Mr. Akashdeep B N

Ph.D Viva-Voce

Mr. Yuvaraja Naik from our Department defended his viva voce for the Thesis titled “”Optimization of Process Parameters on Friction Stir Welding (FSW) in Al-Si alloys through Experimental and Modelling Techniques” for the award of Ph.D. degree under the guidance of Dr.Shailesh Rao.A, Prof.  & Head, Department of Mechanical Engineering.

2017

A course titled “Introduction to Fluid Mechanics” has been taken up by one of our faculty  Mr Vinod A, Assistant Professor, Department of Mechanical Engineering, KSSEM has completed the course and had secured Elite Grade in the exam.

Click here to view>>

2016

Sports

Events Position MECHANICAL ENGINEERING DEPARTMENTWINNERS
Running race (100m) II Mr.NAVEEN K S
III Mr. SURESH
Shot Put(male) III Mr. BHARATH KUMAR
Shot Put(female) III Dr. JYOTHI PN
Discus throw III Mr. BHARATH KUMAR

Mechanical Engineering Staff winners for Aarohana cultural events:-

Events Nature Position Winners Details
TUG OF WAR(GENTS) TEAM I CHANDU D
AKASHDEEP B N
RAJU H
E LOKESH
SHEENA T V
SANTHOSH KUMAR K J
VINOD S
YUVARAJA  NAIK

Mechanical Engineering Staff winners for Aarohana Sports events:-

Events Nature Position Winnners
THROW BALL TEAM I JYOTHI P N
RADHIKA A
SAUMIYA ABHRAHAM
KUSUMA K V (Basic Science)
VINUTHA S V (Basic Science)
BHAGYA C E (Basic Science)
PARVATHI M (Basic Science)
PAVITHRA (Basic Science)
KAVYA T N (Basic Science)
MINI CRICKET TEAM I Dr.SHAILESH RAO
YUVARAJA NAIK
HARSHA J
BHARATH KUMAR
RAJU H
LOKESH
SHIVANAND
RAVI H K
MANJUNATH G
CARROM (MEN) SOLO I VINOD  S
II YUVARAJA NAIK
TABLE TENNIS(MEN) SOLO I AKASHDEEP B N

Dr. S.N. Sridhara

Dr. S.N. Sridhara

Dr. S.N Sridhara, Principal/Director,  KSSEM received the honor of National award for the Best Principal from ISTE.

Dr. Jyothi P N

Dr. Jyothi P N

  • Dr. Jyothi PN successfully accomplished Doctorate of Philosophy on 11th September 2015
  • KSCST Project grant to the projectExperimental studies on cutting parameters during drilling operation of mild steel using eco friendly vegetable oil as cutting fluid” guided by Dr. Jyothi PN

Mr. Bharath Kumar

Mr. Bharath Kumar

 Mr. Bharath Kumar has attained 100% result in the subjects “Agile Manufacturing”, B E 7th semester, Feb 2016

Mr. Harsha JMr. Harsha J  Mr. Harsha J has attained 100% result in the subject AUTOMATION IN MANUFACTURING”, B E 7th semester, Feb 2016. Mr. Harsh J has registered for Ph.D under the guidance of Dr. Desai Gowda, in the year 2015-16.  Title of Research: “Investigation of Melt flow on dissimilar composition of Al-Si during Friction Stir -Welding Process”

Mr. Vinod A

Mr. Vinod Sharma

Mr. Vinod Sharma has registered for Ph. D in VTU, under the guidance of Dr. S. N. Sridhara, in the year 2015-2016. Title of the research: “Experimental and computational analysis of natural and forced convection heat transfer in perforated fins”

Mr. Akash deep B N

Mr. Akashdeep B N

Mr. Akashdeep B N has registered for Ph.D under the guidance of Dr. Rajanna, in the year 2015-16. Title of Research: “Experimental Investigation on mechanical and corrosion properties on Hybrid Al-Mg alloys for Marine Applications” KSCST Project grant to the projectDesign and fabrication of automated manual gear     transmission in motor bikes” guided by Mr. Akashdeep BN

Mr. Santosh Kumar K J

Mr. Santhosh Kumar K J

KSCST Project grant to the projectFriction Stir Welding of Dissimilar Eutectic Al-Si Alloys by using Vertical Milling Machine” guided by Mr. Santhosh Kumar

2015

Dr. S.N. Sridhara

Dr. S.N. Sridhara

The Project entitled, “Comfortable coconut tree climber”, has been awarded “BEST PROJECT” for the year 2014-2015 under the major guidance of Dr. S.N. Sridhara and has attained 100% result in the subject “Power Plant Design”, M. Tech 3rd semester, Feb 2015.

Dr.Shailesh Rao A

Dr. Shailesh Rao. A

  Dr. Shailesh Rao A presented a paper in International Conference on AMRE 2014, Zurich, Switzerland and published papers in International Journal of Advancements in Mechanical and Aeronautical Engineering, Journal of Materials and Manufacturing Processes, METTRANS B, Journal of Materials, Spinger.

Dr. Jyothi P N Mrs. P. N. Jyothi  Mrs. P. N. Jyothi has published papers in International Journal of Advancements in Mechanical and Aeronautical Engineering–Journal of Materials, Spinger and has attained 100% result in the subject “Non-Traditional Machining”, BE 6th semester, July 2015.

Mr. J Prashanth

Mr. J.Prashanth

Project entitled “Experimental Investigation to study the performance and emission characteristics of DTSI engine using Ethanol – Gasoline fuel blend” has been selected for sponsorship by KSCST for the year 2015, under the guidance of Mr. J.Prashanth, Asst. Professor, Department of Mechanical Engineering and has attained 100% result in the subject “Mechatronics System Design”, M. Tech 1st semester, Feb 2015.

Mr. Akash deep B N

Mr. Akashdeep B N

Mr. Akashdeep B N has published paper in International Journal of Advanced Technology in Engineering and Science and has attained 100% result in the subjects “Theory of Plasticity”, BE 7th semester, Feb 2015 and in “Tribology and Bearing Design”, BE 8th semester Mechanical, July 2015.

Mr. Shivanand

Mr. Shivanand

Mr. Shivanand, has presented a paper in an International Conference on Engineering, Science, Management and Advances in Research Technology, T. John Institute of technology, April, 2015, Bengaluru, India and has attained 100% result in the subjects “Experimental Mechanics” M. Tech 1st semester, Feb 2015 and in “Experimental Techniques”, M. Tech 3rd semester, Feb 2015.

Mr. Harsha J

Mr. Harsha J

 Mr. Harsha J has attained 100% result in the subject “Hydraulics & Pneumatics”, B E 7th semester, Feb 2015 and in the subject “Computer Integrated Manufacturing , BE 6th semester, July 2015.

Mr.Yuvaraja Naik

Mr. Yuvaraja Naik

Mr. Yuvaraja Naik has attained 100% result in the subject “Experimental Stress Analysis”, B E 7th semester, Feb 2015 and in “Control Engineering” subject, BE 8th semester, July 2015.

Mr. Bharath Kumar

Mr. Bharath Kumar

Mr. Bharath Kumar has attained 100% result in the subjects “Agile Manufacturing”, B E 7th semester, Feb 2015 and “Power Plant Engineering”, B E 8th semester, July 2015.

Mr.Hareesh A

Mr. Hareesh A

Mr. Hareesh A has attained 100% result in the subject “Automotive Engineering” B E 8th semester, July 2015.

Mr. Santosh Kumar K J

Mr.Santosh Kumar K J

Mr. Santhosh Kumar K J has attained 100% result in the subject “Fracture Mechanics”, M. Tech 3rd semester, Feb 2015.

2014 1.Dr.Shailesh Rao A1.Shailesh Rao A, et.al. “Investigation of Particle Segregation and Solidification Time in FGM’s Using Centrifuge Casting Techniques”, Applied Mechanics and Materials, accepted for publication. 2.Shailesh Rao A, P N Jyothi, “Processing of ZA-27 Based MMC Reinforced With Al2O3 By Centrifugal Casting”, International Journal of Advancements in Mechanical and Aeronautical Engineering– IJAMAE, Volume 2: Issue 1 [ISSN: 2372-4153], Publication Date: 30 April, 2015 3.Shailesh Rao A, “Effect of melt flow with various rotational speeds in vertical centrifugal casting process on appearance, microstructure and hardness behavior of Al-2Si alloy”, Journal of Materials and Manufacturing Processes, Taylor and Francis, DOI.10.1080/10426914.2015.1019093 (IF: 1.48) 4.Shailesh Rao A, et.al., “Effect of melt flow with various rotational speeds in vertical centrifugal casting process on appearance, microstructure and hardness behaviour in Al-2Si alloy”, METTRANS B, DOI 10.1007/s11663-014-0257-y (IF: 1.323) 5.Dr. Shailesh Rao, Jyothi P N, et.al., “Processing of ZA-27 Based MMC Reinforced with Al2O3 by Centrifugal Casting”, October 25-26, 2014, Int.Conf on AMRE 2014, Zurich, Switzerland.2.Mr. J PrashanthA project entitled “Experimental Investigation to study the performance and emission characteristics of DTSI engine using Ethanol – Gasoline fuel blend” has been selected for sponsorship by KSCST for the year 2015, under the guidance of Mr. J.Prashanth, Asst. Professor, Dept. of Mechanical Engineering.3.Mrs. Alam RadhikaRegistered for Ph.D. under the Guidance of Dr. Shailesh Rao. A. Title of the research: “Experimental Studies on Cutting Parameters during Machining Process using Bio- Oils as Cutting Fluids”4.Mr. Santosh Kumar K JRegistered for Ph.D. under the Guidance of Dr. Rajanna. S. Title of the research: “Study of Wear and Fatigue Properties of Austempered Ductile Iron”5.Mr. ShivanandMr. Shivanand, “Effect of stain rate on fracture toughness of HEMP fiber composites”, International conference on engineering, science, management and advances in research technology (ICESMART-15)”, T.John Institute of technology, 29th and 30th April, 2015, Bengaluru, India2013-20141.Mr. Akash deep B NGot Best Teacher award 20152.Faculty AchieversP. N. Jyothi, Rao A. Shailesh, et.al, “Influence of Refiner in ZA-12 Alloys During Centrifugal Casting Process” Journal of Materials, Spinger, Vol. 66, No. 5, 2014,pp 720-725.3.Mr.Yuvaraja NaikA project work entitled “MONITORING OF PRESSURE IN A TWO WHEELER TUBING TYRE UNDER MOTION” has been selected by KSCST, under UG student project proposal for the year 2013-2014.4.Faculty AchieversSuccessfully completed ,VTU sponsored research work on “Development of Bio fuel combustor”5.Mrs. Jyothi P N1.P.N. Jyothi,. A Shailesh Rao, et.al, “Influence of Refiner Aluminium Titanium Boride on the ZA alloys Processed through Centrifugal Casting” ASME 2013 International Mechanical Engineering Congress and Exposition,IMECE2013,November 15-21, 2013, San Diego, California, USA. 2.Jyothi P N , Shailesh Rao A, et.al,“Understanding the Melt Flow Behaviour of ZA alloys Processed through Centrifugal Casting” International Journal of Mechanical Engineering and Technology (IJMET), ISSN 0976 – 6340(Print),ISSN 0976 – 6359(Online) Volume 4, Issue 1, January – February (2013)

Share This